Fujitsu FI-5900C Memulai - Halaman 15

Jelajahi secara online atau unduh pdf Memulai untuk Pemindai Fujitsu FI-5900C. Fujitsu FI-5900C 30 halaman. Consumable replacement and cleaning instructions
Juga untuk Fujitsu FI-5900C: Memulai (30 halaman), Manual Prosedur Instalasi (7 halaman), Manual Prosedur Instalasi (9 halaman), Prosedur Instalasi (3 halaman), Brosur & Spesifikasi (2 halaman), Panduan Tambahan (4 halaman), Brosur & Spesifikasi (4 halaman), Petunjuk Penggantian dan Pembersihan Bahan Habis Pakai (24 halaman), Prosedur Penggantian (22 halaman), Petunjuk Pembersihan (2 halaman)

Halaman Cetak
Fujitsu FI-5900C Memulai
1. Open the hopper.
Be sure to open the hopper before turning
ATTENTION
on the power with the Power button.
2. Press the power button to turn on the scanner.
3. Turn on your computer and log on to Windows.
Be sure to log on as a user with "Adminis-
ATTENTION
trator" privileges.
4. When the scanner is automatically detected,
[Found New Hardware Wizard] or [Add/
Remove Hardware Wizard] dialog box
appears. Click [Cancel] to close the Wizard
dialog box.
5. Insert the Setup CD-ROM into the CD drive.
⇒
<SETUP DISK START UP SCREEN> appears.
Power button
Hopper
fi-5900C Image Scanner Getting Started
This screen may not appear if the
ATTENTION
"AutoPlay" setting is set to off. In this case,
find "Install.exe" in the CD-ROM using
"Explore" or "My Computer" to start instal-
lation.
6. Click [INSTALL PRODUCTS], and then click
[TWAIN Driver].
7. The Error Recovery Guide Installation window
appears.
The Error Recovery Guide is an application with
which you can view on-screen information for
troubleshooting errors that may occur in the scan-
ner. This guide helps solve problems, so select
[Yes] to install. You may also choose to install it
later.
After you select [Yes] for installing Error
ATTENTION
Recovery Guide, the [Choose Setup Lan-
guage] dialog box appears. Select a lan-
guage and follow the on-screen
instructions. The Error Recovery Guide
dialog box is automatically displayed when
the installation is complete. Wait until the
installation of the TWAIN driver starts.
8. Image Processing Software Option installation
windows appears.
The Image Processing software is an optional
software that provides advanced binarization
image processing to the scanner dirver.
Selecting [Yes] in the Image Processing
ATTENTION
Software Option installation window will
automatically execute the installation. Click
the [OK] button on the confirmation mes-
sage that appears when the installation is
complete. After that the TWAIN driver
installation is started.
7