Fujitsu FI-5900C Memulai - Halaman 26

Jelajahi secara online atau unduh pdf Memulai untuk Pemindai Fujitsu FI-5900C. Fujitsu FI-5900C 30 halaman. Consumable replacement and cleaning instructions
Juga untuk Fujitsu FI-5900C: Memulai (30 halaman), Manual Prosedur Instalasi (7 halaman), Manual Prosedur Instalasi (9 halaman), Prosedur Instalasi (3 halaman), Brosur & Spesifikasi (2 halaman), Panduan Tambahan (4 halaman), Brosur & Spesifikasi (4 halaman), Petunjuk Penggantian dan Pembersihan Bahan Habis Pakai (24 halaman), Prosedur Penggantian (22 halaman), Petunjuk Pembersihan (2 halaman)

Halaman Cetak

Appendix 2

During its operation, the inside

AUTION

glass of the ADF becomes very hot.

Before you clean inside the scan-

ner, turn off its power and unplug

the AC adapter from the outlet. Wait

for at least 15 minutes.

Do not turn off the scanner when

you clean the Feed rollers or Eject

rollers.

■ Cleaning Materials

Cleaning

Parts No.

Materials

Cleaning sheet

CA99501-

0016

Cleaner F1

PA03950-

0352

Cleaner F2

PA03950-

0353

Cleaning wipe

PA03950-

0419

Cotton swab

Commercially available

Lint-free dry

cloth

*1: For details about the cleaning materials, contact the

FUJITSU scanner dealer where you purchased the scan-

ner.

*2: Pre-moistened with Cleaner F1, Cleaning Wipes are

used instead of moistened cloths.

■ Cleaning Method

The ADF must be cleaned with a lint-free cloth moist-

ened with the Cleaner F1.

The Feed roller must be cleaned with a lint-free cloth

moistened with the Cleaner F2.

AP-

DAILY CARE

Remarks

20 sheets/pack

For the cleaning method,

refer to "4 Daily Care in

the fi-5900C Operator's

Guide.

1 bottle

Moisten a cloth with this

fluid and wipe the scan-

ner to clean.

1 bottle

Moisten a cloth with this

fluid and clean metal

rollers only.(Do not use

for any other parts.)

24 sheets per pack

(*1)(*2)

It may take long before the cleaner

ATTENTION

vaporizes if a large quantity is used.

When cleaning the scanner parts,

dampen a cloth with modest quantities

of the cleaner. In addition, wipe off the

cleaner completely with a soft lint-free

cloth to leave no residue on the surface

of the cleaned parts.

■ Locations and Cycle for Cleaning

Part to clean

Pad

Pick rollers

Brake roller

Separator rollers

Feed rollers

Pinch rollers

Transport path

Glass

Skew-detection sensor

Document sensor

The scanner must be cleaned more fre-

ATTENTION

quently if you scan any of the following

type of sheets:

•

Documents of coated paper

•

Documents that are almost completely

covered with printed text or graphics

•

Chemically treated documents such

as carbonless paper

•

Documents containing a large amount

of calcium carbonate

•

Documents written with pencil

For details on the cleaning the ADF, refer to "4.DAILY

CARE" in the fi-5900C Operator's Guide on the Setup

CD-ROM".

Standard Cleaning Cycle

Clean these parts after every

10,000 scans.