Fujitsu FI-5900C Petunjuk Penggantian dan Pembersihan Bahan Habis Pakai - Halaman 8

Jelajahi secara online atau unduh pdf Petunjuk Penggantian dan Pembersihan Bahan Habis Pakai untuk Pemindai Fujitsu FI-5900C. Fujitsu FI-5900C 24 halaman. Consumable replacement and cleaning instructions
Juga untuk Fujitsu FI-5900C: Memulai (30 halaman), Manual Prosedur Instalasi (7 halaman), Manual Prosedur Instalasi (9 halaman), Prosedur Instalasi (3 halaman), Brosur & Spesifikasi (2 halaman), Panduan Tambahan (4 halaman), Memulai (30 halaman), Brosur & Spesifikasi (4 halaman), Prosedur Penggantian (22 halaman), Petunjuk Pembersihan (2 halaman)

Halaman Cetak
Fujitsu FI-5900C Petunjuk Penggantian dan Pembersihan Bahan Habis Pakai
fi-5900C & fi-5950 C
ONSUMABLE
8
R
C
EPLACEMENT AND
LEANING
R
S
EPLACING THE
EPARATION
•
Install the Separation Rollers by sliding them on to each shaft, aligning
the groove on the roller with the screw on the shaft.
Screw
I
NSTRUCTIONS
R
(
OLLERS
CONT
•
Remove the two Separation
Rollers by sliding them
inwards and off the shafts (in
the direction of the arrow).
Groove
•
Close the Roller Cover.
Roller
Cover
Note:
The Separation Rollers will
Separation
automatically spring to their
Rollers
proper position.
•
Close the ADF Cover.
•
Reset the Separator Roller
Counter in the Software
Operation Panel.
.)