Fujitsu FI-5900C Prosedur Penggantian - Halaman 5

Jelajahi secara online atau unduh pdf Prosedur Penggantian untuk Pemindai Fujitsu FI-5900C. Fujitsu FI-5900C 22 halaman. Consumable replacement and cleaning instructions
Juga untuk Fujitsu FI-5900C: Memulai (30 halaman), Manual Prosedur Instalasi (7 halaman), Manual Prosedur Instalasi (9 halaman), Prosedur Instalasi (3 halaman), Brosur & Spesifikasi (2 halaman), Panduan Tambahan (4 halaman), Memulai (30 halaman), Brosur & Spesifikasi (4 halaman), Petunjuk Penggantian dan Pembersihan Bahan Habis Pakai (24 halaman), Petunjuk Pembersihan (2 halaman)

eplaCing the

iCk

Worn, defective, or improperly installed Pick Rollers will cause misfeeds

and paper jams. The Pick Rollers have an approximate life of 600,000

pages. If NCR or carbonless paper is used the life span of the Pick Roll-

ers may be decreased by half.

•

Make sure there is no paper

in the stacker.

•

Press the ADF Cover Open

Button.

Note:

The cover opens slowly on it's

own.

•

Open the Roller Cover by

placing your fingers in either

of the openings of the cover

and pulling out.

•

Pull out on the tab that locks

the Pick Roller in place in the

direction of the arrow and

slide the Pick Roller off the

shaft.

•

Repeat the procedure above

to remove the second Pick

Roller.

fi-5900C C

olleRs

Opening

onsumable

eplaCement and

Roller Cover

Roller

Cover

Pick Roller

Tab

leaning

nstRuCtions