Fujitsu fi-7300NX Petunjuk Penggantian dan Pembersihan Bahan Habis Pakai - Halaman 2
Jelajahi secara online atau unduh pdf Petunjuk Penggantian dan Pembersihan Bahan Habis Pakai untuk Pemindai Fujitsu fi-7300NX. Fujitsu fi-7300NX 27 halaman. Image scanner
Juga untuk Fujitsu fi-7300NX: Memulai (2 halaman)
Halaman Cetak
Fi-7300NX Daily Care and Consumable Replacement Guide
This section describes how to clean the scanner.
Do not use aerosol spray or spray that contains alcohol. Paper dust blown up by strong air from the spray
may enter inside the scanner which may cause the scanner to fail or malfunction.
Also note that sparks generated by static electricity may cause a fire.
The inside of the ADF becomes very hot when the scanner is being used. Before you start cleaning the inside
of the ADF, make sure to turn off the power, unplug the power cable and wait for at least 15 minutes for the
inside of the ADF to cool down.
Cleaning Materials
ATTENTION
In order to use the cleaning materials safely and correctly, read the precautions on each product thoroughly.