Fujitsu FI-800R Panduan Penggantian dan Pembersihan Bahan Habis Pakai - Halaman 13
Jelajahi secara online atau unduh pdf Panduan Penggantian dan Pembersihan Bahan Habis Pakai untuk Pemindai Fujitsu FI-800R. Fujitsu FI-800R 19 halaman. Image scanner
Halaman Cetak
Note that the suggested replacement cycles are guidelines for using A4 (80 g/m2 [20 lb])
wood-free or wood-containing paper, as these cycles vary depending on the type of
documents scanned and how often the scanner is used and cleaned.
For information on purchasing the consumables, contact the distributor/dealer where you
purchased this product. Refer to the contact information in the Contact List if supplied with
this product, or refer to the contact information in the Contact for Inquiries section if provided
in Safety Precautions supplied with this product, and then make an inquiry.
Replacing the Pad Unit
Replace the pad unit in following procedure.
1. Turn off the scanner, unplug the power cable and wait for at least 15 minutes.
2. Open the ADF paper chute (feeder).
3. Open the ADF