Fujitsu FI-800R Sarf Malzemesi Değiştirme ve Temizleme Kılavuzu - Sayfa 13
Tarayıcı Fujitsu FI-800R için çevrimiçi göz atın veya pdf Sarf Malzemesi Değiştirme ve Temizleme Kılavuzu indirin. Fujitsu FI-800R 19 sayfaları. Image scanner
Sayfayı Yazdır
Note that the suggested replacement cycles are guidelines for using A4 (80 g/m2 [20 lb])
wood-free or wood-containing paper, as these cycles vary depending on the type of
documents scanned and how often the scanner is used and cleaned.
For information on purchasing the consumables, contact the distributor/dealer where you
purchased this product. Refer to the contact information in the Contact List if supplied with
this product, or refer to the contact information in the Contact for Inquiries section if provided
in Safety Precautions supplied with this product, and then make an inquiry.
Replacing the Pad Unit
Replace the pad unit in following procedure.
1. Turn off the scanner, unplug the power cable and wait for at least 15 minutes.
2. Open the ADF paper chute (feeder).
3. Open the ADF