Fujitsu fi-8190 Panduan Operator - Halaman 30
Jelajahi secara online atau unduh pdf Panduan Operator untuk Pemindai Fujitsu fi-8190. Fujitsu fi-8190 47 halaman. Image scanner
Juga untuk Fujitsu fi-8190: Memulai (2 halaman), Memulai (2 halaman)
3
Pinch and lower the arms of the print cartridge holder with your fingers as shown below to raise the
arms on the other end.
4
Pinch and remove the old print cartridge with your fingers.
5
Reinstall the new print cartridge.
(Refer to steps
5
to
10
in
ATTENTION
When installing the print cartridge, make sure that you install it in the correct orientation.
6
Confirm that the scanner is connected to the computer, then turn on the scanner.
For details about how to connect the scanner to the computer, refer to the Operator's Guide for your scanner.
7
Reset the ink counter in the following procedure.
ATTENTION
Be sure to reset the ink counter after replacing the print cartridge.
Use Software Operation Panel to reset the ink counter.
For details about Software Operation Panel, refer to the Operator's Guide for your scanner.
a
Display the [Software Operation Panel] window.
Windows Server 2008 R2/Windows 7
Click [Start] menu → [All Programs] → [fi Series] → [Software Operation Panel].
Installing the Print Cartridge (page
30
16).)
Basic Operation