Fujitsu fi-8190 운영자 매뉴얼 - 페이지 30
{카테고리_이름} Fujitsu fi-8190에 대한 운영자 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Fujitsu fi-8190 47 페이지. Image scanner
Fujitsu fi-8190에 대해서도 마찬가지입니다: 시작하기 (2 페이지), 시작하기 (2 페이지)
페이지 인쇄
3
Pinch and lower the arms of the print cartridge holder with your fingers as shown below to raise the
arms on the other end.
4
Pinch and remove the old print cartridge with your fingers.
5
Reinstall the new print cartridge.
(Refer to steps
5
to
10
in
ATTENTION
When installing the print cartridge, make sure that you install it in the correct orientation.
6
Confirm that the scanner is connected to the computer, then turn on the scanner.
For details about how to connect the scanner to the computer, refer to the Operator's Guide for your scanner.
7
Reset the ink counter in the following procedure.
ATTENTION
Be sure to reset the ink counter after replacing the print cartridge.
Use Software Operation Panel to reset the ink counter.
For details about Software Operation Panel, refer to the Operator's Guide for your scanner.
a
Display the [Software Operation Panel] window.
Windows Server 2008 R2/Windows 7
Click [Start] menu → [All Programs] → [fi Series] → [Software Operation Panel].
Installing the Print Cartridge (page
30
16).)
Basic Operation