Brother HL-2270DW Panduan Pengguna Jaringan - Halaman 30

Jelajahi secara online atau unduh pdf Panduan Pengguna Jaringan untuk Server Cetak Brother HL-2270DW. Brother HL-2270DW 47 halaman. How do i configure the wireless printer using wi-fi protected setup or aoss and install the printer driver in windows?
Juga untuk Brother HL-2270DW: Panduan Pengaturan Cepat (36 halaman), Panduan Pengaturan Cepat (36 halaman), Panduan Instalasi (5 halaman), Panduan Pengaturan Cepat (35 halaman), Pertanyaan Umum & Pemecahan Masalah (6 halaman)

Control panel setup

Reset the network settings to the factory default

You can reset the print server back to its default factory settings (resetting all information such as the

password and IP address information).

Note

• This function resets all wired and wireless network settings to the factory default.

• You can also reset the print server back to its factory default settings using the BRAdmin applications or

Web Based Management (web browser). (For more information, see Other Management Utilities

on page 6.)

Turn off the machine.

Make sure that the front cover is closed and the power cord is plugged in.

Hold down Go as you turn on the power switch. Keep Go pressed down until all the LEDs light up, and

then the Ready LED turns off.

Release Go. Make sure that all the LEDs turn off.

Press Go six times. Make sure that all the LEDs light up to indicate the print server has been reset to its

factory default settings. The machine will restart.