Brother HL-2270DW Instrukcja obsługi dla sieci - Strona 30

Przeglądaj online lub pobierz pdf Instrukcja obsługi dla sieci dla Serwer druku Brother HL-2270DW. Brother HL-2270DW 47 stron. How do i configure the wireless printer using wi-fi protected setup or aoss and install the printer driver in windows?
Również dla Brother HL-2270DW: Podręcznik szybkiej konfiguracji (36 strony), Podręcznik szybkiej konfiguracji (36 strony), Instrukcja instalacji (5 strony), Podręcznik szybkiej konfiguracji (35 strony), Pytania i rozwiązywanie problemów (6 strony)

Control panel setup

Reset the network settings to the factory default

You can reset the print server back to its default factory settings (resetting all information such as the

password and IP address information).

Note

• This function resets all wired and wireless network settings to the factory default.

• You can also reset the print server back to its factory default settings using the BRAdmin applications or

Web Based Management (web browser). (For more information, see Other Management Utilities

on page 6.)

Turn off the machine.

Make sure that the front cover is closed and the power cord is plugged in.

Hold down Go as you turn on the power switch. Keep Go pressed down until all the LEDs light up, and

then the Ready LED turns off.

Release Go. Make sure that all the LEDs turn off.

Press Go six times. Make sure that all the LEDs light up to indicate the print server has been reset to its

factory default settings. The machine will restart.