Fujitsu eternus af Panduan Konfigurasi - Halaman 24
Jelajahi secara online atau unduh pdf Panduan Konfigurasi untuk Penyimpanan Fujitsu eternus af. Fujitsu eternus af 28 halaman. Fibre channel for citrix xenserver
Juga untuk Fujitsu eternus af: Panduan Konfigurasi (25 halaman), Panduan Konfigurasi (32 halaman), Panduan Konfigurasi (43 halaman)
![Fujitsu eternus af Panduan Konfigurasi](/uploads/products/server2/2442740/2442740.jpg)
Chapter 9
Setting the Multipaths
For the iSCSI LAN (used to transfer data), do not set multipath configuration with IP Network Multipathing
(IPMP).
When configuring the multipath, use MPxIO in the same way as FC-SAN is used for configuration.
9.1
Enabling MPxIO
Enable MPxIO.
Check the [mpxio-disable="no"] line in the "/kernel/drv/iscsi.conf" file.
Change the parameter to "no" when "yes" is set.
Example for changing the "/kernel/drv/iscsi.conf" file:
# To globally enable MPxIO on all iscsi ports set:
# mpxio-disable="no";
#
# To globally disable MPxIO on all iscsi ports set:
# mpxio-disable="yes";
#
mpxio-disable="no";
Check whether "no" is set for the underlined portion.
9.2
Editing "/kernel/drv/scsi_vhci.conf"
Edit the "/kernel/drv/scsi_vhci.conf" file.
1
Specify the multipath control method.
Check that a "load-balance="round-robin";" line exists.
Otherwise, add this line or change its value to "enable".
2
Enable the auto-failback function.
Check that an "auto-failback="enable";" line exists.
FUJITSU Storage ETERNUS DX, ETERNUS AF Configuration Guide -Server Connection- (iSCSI) for Oracle Solaris
24
Copyright 2017 FUJITSU LIMITED
P3AM-4042-18ENZ0