Fujitsu eternus af Configuration Manual - Page 24
Browse online or download pdf Configuration Manual for Storage Fujitsu eternus af. Fujitsu eternus af 28 pages. Fibre channel for citrix xenserver
Also for Fujitsu eternus af: Configuration Manual (25 pages), Configuration Manual (32 pages), Configuration Manual (43 pages)
![Fujitsu eternus af Configuration Manual](/uploads/products/server2/2442740/2442740.jpg)
Chapter 9
Setting the Multipaths
For the iSCSI LAN (used to transfer data), do not set multipath configuration with IP Network Multipathing
(IPMP).
When configuring the multipath, use MPxIO in the same way as FC-SAN is used for configuration.
9.1
Enabling MPxIO
Enable MPxIO.
Check the [mpxio-disable="no"] line in the "/kernel/drv/iscsi.conf" file.
Change the parameter to "no" when "yes" is set.
Example for changing the "/kernel/drv/iscsi.conf" file:
# To globally enable MPxIO on all iscsi ports set:
# mpxio-disable="no";
#
# To globally disable MPxIO on all iscsi ports set:
# mpxio-disable="yes";
#
mpxio-disable="no";
Check whether "no" is set for the underlined portion.
9.2
Editing "/kernel/drv/scsi_vhci.conf"
Edit the "/kernel/drv/scsi_vhci.conf" file.
1
Specify the multipath control method.
Check that a "load-balance="round-robin";" line exists.
Otherwise, add this line or change its value to "enable".
2
Enable the auto-failback function.
Check that an "auto-failback="enable";" line exists.
FUJITSU Storage ETERNUS DX, ETERNUS AF Configuration Guide -Server Connection- (iSCSI) for Oracle Solaris
24
Copyright 2017 FUJITSU LIMITED
P3AM-4042-18ENZ0