Fujitsu Eternus DX200F Panduan Konfigurasi - Halaman 25

Jelajahi secara online atau unduh pdf Panduan Konfigurasi untuk Penyimpanan Fujitsu Eternus DX200F. Fujitsu Eternus DX200F 38 halaman. Hybrid storage systems, all-flash arrays, power synchronized unit
Juga untuk Fujitsu Eternus DX200F: Panduan Pengoperasian (48 halaman), Setup Manual (10 halaman), Panduan Konfigurasi (28 halaman), Panduan Konfigurasi (13 halaman), Panduan Konfigurasi (16 halaman), Tindakan Pencegahan Keselamatan (12 halaman)

Chapter 9

Checking Connections

9.1

To turn on the connected devices, use the following procedure:

Turn on the Fibre Channel switch power (if used).

Check that the Ready LED (or equivalent) is lit on the Fibre Channel switch.

Turn on the ETERNUS DX/AF.

Check that the Ready LED is lit on the ETERNUS DX/AF.

Turn on the server.

9.2

The ETERNUS DX/AF storage systems' LUNs (Logical Units) recognized by the server are used as physical vol-

umes (hdisks). The "lsdev" command can be used to display them.

Logical unit (LUN) recognition in FJspio environment

•

(Example for the ETERNUS DX60 S4/DX100 S4/DX200 S4, ETERNUS DX60 S3/DX100 S3/DX200 S3, ETERNUS

AF250 S2, ETERNUS AF250, ETERNUS DX200F, and ETERNUS DX60 S2/DX80 S2/DX90 S2)

#lsdev -Cc disk

hdisk0 Available 1S-08-00-8,0 16 Bit LVD SCSI Disk Drive

hdisk1 Available 1S-08-00-9,0 16 Bit LVD SCSI Disk Drive

hdisk2 Available 11-08-02-01 ETERNUS_DXL - Fujitsu Storage Systems ETERNUS

(Example for the ETERNUS DX500 S4/DX600 S4, ETERNUS DX500 S3/DX600 S3, ETERNUS AF650 S2, and

ETERNUS AF650)

#lsdev -Cc disk

hdisk0 Available 1S-08-00-8,0 16 Bit LVD SCSI Disk Drive

hdisk1 Available 1S-08-00-9,0 16 Bit LVD SCSI Disk Drive

hdisk2 Available 11-08-02-01 ETERNUS_DXM - Fujitsu Storage Systems ETERNUS

FUJITSU Storage ETERNUS DX, ETERNUS AF Configuration Guide -Server Connection- (Fibre Channel) for AIX

P3AM-3782-23ENZ0