Fujitsu Eternus DX200F Panduan Konfigurasi - Halaman 7

Jelajahi secara online atau unduh pdf Panduan Konfigurasi untuk Penyimpanan Fujitsu Eternus DX200F. Fujitsu Eternus DX200F 38 halaman. Hybrid storage systems, all-flash arrays, power synchronized unit
Juga untuk Fujitsu Eternus DX200F: Panduan Pengoperasian (48 halaman), Setup Manual (10 halaman), Panduan Konfigurasi (28 halaman), Panduan Konfigurasi (13 halaman), Panduan Konfigurasi (16 halaman), Tindakan Pencegahan Keselamatan (12 halaman)

Chapter 1

Workflow

This chapter describes how to connect the ETERNUS DX/AF to a server running AIX. The workflow is shown

below.

Required Documents

"Server Support Matrix"

•

"Server Support Matrix for FC-SWITCH"

"Configuration Guide -Server Connection- Storage System Settings" that corresponds to the ETERNUS DX/AF

•

to be connected

"Configuration Guide -Server Connection- (Fibre Channel) Fibre Channel Switch Settings"

•

"ETERNUS Web GUI User's Guide"

•

"ETERNUSmgr Install Guide"

•

"ETERNUSmgr User Guide"

•

Manuals supplied with the server, Fibre Channel card, Fibre Channel card driver, and multipath driver

Workflow

Installing ETERNUSmgr and Setting Up the ETERNUS DX/AF

If ETERNUSmgr is to be used, install it and set up the ETERNUS DX/AF. Also, check the WWN of the

Fibre Channel card for the server that is required to set the ETERNUS DX/AF.

"Chapter 4 Checking the Server Information" (page 16)

•

"Chapter 5 Installing and Setting Up ETERNUSmgr" (page 17)

•

"Chapter 6 Setting Up the ETERNUS DX/AF" (page 18)

•

Checking the setup and maintenance operations

•

"ETERNUS Web GUI User's Guide"

Installing ETERNUSmgr

•

"ETERNUSmgr Install Guide"

•

Checking the ETERNUSmgr operational procedures

"ETERNUSmgr User Guide"

Setting up the ETERNUS DX/AF

•

"Configuration Guide -Server Connection- Storage System Settings" that corresponds to the ETER-

NUS DX/AF to be connected

FUJITSU Storage ETERNUS DX, ETERNUS AF Configuration Guide -Server Connection- (Fibre Channel) for AIX

P3AM-3782-23ENZ0