Fujitsu ETERNUS DX60 S2 Panduan Pengguna - Halaman 9

Jelajahi secara online atau unduh pdf Panduan Pengguna untuk Penyimpanan Fujitsu ETERNUS DX60 S2. Fujitsu ETERNUS DX60 S2 14 halaman. Server connection. (fibre channel) for aix
Juga untuk Fujitsu ETERNUS DX60 S2: Panduan Pengguna (35 halaman), Panduan Pengguna (42 halaman), Panduan Konfigurasi (28 halaman), Panduan Konfigurasi (16 halaman), Panduan Konfigurasi (38 halaman), Panduan Instalasi Perangkat Keras dan Perangkat Lunak (36 halaman)

Halaman Cetak
Fujitsu ETERNUS DX60 S2 Panduan Pengguna
Cable Connection
S T E P
Various cables need to be connected to the rear of the ETERNUS DX Disk storage system.
●
Point
●
The cables should never be bent, twisted or pulled.
IMPORTANT
LAN Cable (For Operation Management)
Connect a LAN cable (for operation management) to each MNT port.
Cable
-Installation- "4.1 LAN Cable Connection (For Operation Management)"
Host Interface Cable
Connect a host interface cable to each of these ports.
Cable
FC
●
iSCSI
●
SAS
●
-Installation- "4.2 Host Interface Connection"
FUJITSU Storage ETERNUS DX60 S2 Disk storage system Read Me First
To help with cable management and prevent incorrect connection, attach labels to the cables and
make a note of connection origins and destinations.
This step describes dual controller type as an example. Note that there is only controller 0 (CM#0) for
single controller type.
Rear view
Controller (CM#0)
Rear view
Copyright 2014 FUJITSU LIMITED
Controller (CM#1)
The MNT port
is on the right side.
Port#0 (left), Port#1 (right)
Port#0 (left), Port#1 (right)
Port#0 (left), Port#1 (right)
9
Controller
Enclosure
Controller
Enclosure
Controller
Enclosure
Controller
Enclosure
P3AM-5542-07EN