Fujitsu Eternus DX90 S2 Panduan Pengguna - Halaman 13

Jelajahi secara online atau unduh pdf Panduan Pengguna untuk Penyimpanan Fujitsu Eternus DX90 S2. Fujitsu Eternus DX90 S2 35 halaman. Server connection. (fibre channel) for aix
Juga untuk Fujitsu Eternus DX90 S2: Panduan Pengguna (42 halaman), Manual (18 halaman), Instal Pengaturan (20 halaman), Konfigurasi Manual Koneksi Server (13 halaman), Instalasi Perangkat Keras (23 halaman), Panduan Konfigurasi (28 halaman), Panduan Konfigurasi (15 halaman), Panduan Konfigurasi (38 halaman)

Chapter 1

Workflow

Installing the Driver

Install the appropriate driver for the Fibre Channel card being used.

Applicable document varies according to the server, OS, and Fibre Channel Card type being used. Se-

lect from the following list.

"Chapter 7 Installing Drivers and Setting Up the Server" (page 24)

•

Installing Fibre Channel cards, installing drivers, and performing setup

"ETERNUS DX Disk storage systems User's Guide -Server Connection- (Fibre Channel) for Linux

Driver Settings for Non-Fujitsu Fibre Channel Cards"

Checking the Fibre Channel card driver versions

•

"Server Support Matrix"

Installing the ETERNUS Multipath Driver

Install the ETERNUS Multipath Driver.

•

"Chapter 10 Setting Up and Checking the Multipath Driver" (page

29)

Installing and setting up the Multipath Driver

•

Manuals provided with the Multipath Driver

•

Checking the corresponding Multipath Driver

"Server Support Matrix"

Connecting the Server to the ETERNUS DX Disk Storage Systems

Connect the server and the ETERNUS DX Disk storage systems using the Fibre Channel cables.

"Chapter 8 Connecting the Server to the ETERNUS DX Disk Storage Systems " (page 25)

•

ETERNUS DX Disk storage systems User's Guide -Server Connection-(Fibre Channel) for Linux

When the ETERNUS Multipath Driver is used

When VERITAS Volume Manager

or the device-mapper multipath

is used. Or, when the Multipath

Driver is not used.

P3AM-3842-12ENZ0