Fujitsu Eternus DX90 S2 사용자 설명서 - 페이지 13

{카테고리_이름} Fujitsu Eternus DX90 S2에 대한 사용자 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. Fujitsu Eternus DX90 S2 35 페이지. Server connection. (fibre channel) for aix
Fujitsu Eternus DX90 S2에 대해서도 마찬가지입니다: 사용자 설명서 (42 페이지), 매뉴얼 (18 페이지), 설치 설정 (20 페이지), 수동 서버 연결 구성 (13 페이지), 하드웨어 설치 (23 페이지), 구성 매뉴얼 (28 페이지), 구성 매뉴얼 (15 페이지), 구성 매뉴얼 (38 페이지)

페이지 인쇄
Fujitsu Eternus DX90 S2 사용자 설명서
Chapter 1
Workflow
Installing the Driver
Install the appropriate driver for the Fibre Channel card being used.
Applicable document varies according to the server, OS, and Fibre Channel Card type being used. Se-
lect from the following list.
"Chapter 7 Installing Drivers and Setting Up the Server" (page 24)
•
•
Installing Fibre Channel cards, installing drivers, and performing setup
"ETERNUS DX Disk storage systems User's Guide -Server Connection- (Fibre Channel) for Linux
-
Driver Settings for Non-Fujitsu Fibre Channel Cards"
Checking the Fibre Channel card driver versions
•
-
"Server Support Matrix"
Installing the ETERNUS Multipath Driver
Install the ETERNUS Multipath Driver.
•
"Chapter 10 Setting Up and Checking the Multipath Driver" (page
29)
Installing and setting up the Multipath Driver
•
Manuals provided with the Multipath Driver
-
•
Checking the corresponding Multipath Driver
"Server Support Matrix"
-
Connecting the Server to the ETERNUS DX Disk Storage Systems
Connect the server and the ETERNUS DX Disk storage systems using the Fibre Channel cables.
"Chapter 8 Connecting the Server to the ETERNUS DX Disk Storage Systems " (page 25)
•
ETERNUS DX Disk storage systems User's Guide -Server Connection-(Fibre Channel) for Linux
When the ETERNUS Multipath Driver is used
13
Copyright 2013 FUJITSU LIMITED
When VERITAS Volume Manager
or the device-mapper multipath
is used. Or, when the Multipath
Driver is not used.
P3AM-3842-12ENZ0