Fujitsu ETERNUS8000 900 Manual - Halaman 23

Jelajahi secara online atau unduh pdf Manual untuk Penyimpanan Fujitsu ETERNUS8000 900. Fujitsu ETERNUS8000 900 28 halaman. Disk storage systems (fibre channel) for oracle solaris
Juga untuk Fujitsu ETERNUS8000 900: Manual (21 halaman), Manual Koneksi Server (25 halaman), Manual Koneksi Server (32 halaman), Manual Koneksi (19 halaman)

Halaman Cetak

Chapter 8

8.1

Turning on the Devices

To turn on the connected devices, use the following procedures:

8.2

Logical Unit Recognition

Check the state of the ETERNUS Disk storage system LUNs (logical units) using the "format"

command.

Example: ETERNUS2000

# format

Searching for disks...done

AVAILABLE DISK SELECTIONS:

/iscsi/[email protected]%3Astorage-system.e2000%3A00001001-cm00002,0

/iscsi/[email protected]%3Astorage-system.e2000%3A00001001-cm00002,1

/iscsi/[email protected]%3Astorage-system.e2000%3A00001001-cm10004,0

/iscsi/[email protected]%3Astorage-system.e2000%3A00001001-cm10004,1

Specify disk (enter its number): Specify disk (enter its number):

P3AM-4182-03ENZ0

Server Connection Guide (iSCSI) for Oracle Solaris

Checking Connections

Procedure

Turn on any devices (such as LAN switches) on the LAN path between the

ETERNUS Disk storage system and server.

After checking that the Ready (or equivalent) LED of the LAN switch is lit, turn on

the ETERNUS Disk storage systems.

After checking that the ETERNUS Disk storage systems' Ready LED is lit, turn

on the server.

1. c6t25d0 <FUJITSU-E2000-0000 cyl 510 alt 2 hd 64 sec 256>

2. c6t26d0 <FUJITSU-E2000-0000 cyl 510 alt 2 hd 64 sec 256>

3. c6t27d0 <FUJITSU-E2000-0000 cyl 510 alt 2 hd 64 sec 256>

4. c6t28d0 <FUJITSU-E2000-0000 cyl 510 alt 2 hd 64 sec 256>

End of procedure

Indicates connection

via "CM0"

Indicates connection

via "CM1"