Fujitsu ETERNUS8000 900 매뉴얼 - 페이지 23

{카테고리_이름} Fujitsu ETERNUS8000 900에 대한 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Fujitsu ETERNUS8000 900 28 페이지. Disk storage systems (fibre channel) for oracle solaris
Fujitsu ETERNUS8000 900에 대해서도 마찬가지입니다: 매뉴얼 (21 페이지), 서버 연결 매뉴얼 (25 페이지), 서버 연결 매뉴얼 (32 페이지), 연결 매뉴얼 (19 페이지)

페이지 인쇄

Chapter 8

8.1

Turning on the Devices

To turn on the connected devices, use the following procedures:

8.2

Logical Unit Recognition

Check the state of the ETERNUS Disk storage system LUNs (logical units) using the "format"

command.

Example: ETERNUS2000

# format

Searching for disks...done

AVAILABLE DISK SELECTIONS:

/iscsi/[email protected]%3Astorage-system.e2000%3A00001001-cm00002,0

/iscsi/[email protected]%3Astorage-system.e2000%3A00001001-cm00002,1

/iscsi/[email protected]%3Astorage-system.e2000%3A00001001-cm10004,0

/iscsi/[email protected]%3Astorage-system.e2000%3A00001001-cm10004,1

Specify disk (enter its number): Specify disk (enter its number):

P3AM-4182-03ENZ0

Server Connection Guide (iSCSI) for Oracle Solaris

Checking Connections

Procedure

Turn on any devices (such as LAN switches) on the LAN path between the

ETERNUS Disk storage system and server.

After checking that the Ready (or equivalent) LED of the LAN switch is lit, turn on

the ETERNUS Disk storage systems.

After checking that the ETERNUS Disk storage systems' Ready LED is lit, turn

on the server.

1. c6t25d0 <FUJITSU-E2000-0000 cyl 510 alt 2 hd 64 sec 256>

2. c6t26d0 <FUJITSU-E2000-0000 cyl 510 alt 2 hd 64 sec 256>

3. c6t27d0 <FUJITSU-E2000-0000 cyl 510 alt 2 hd 64 sec 256>

4. c6t28d0 <FUJITSU-E2000-0000 cyl 510 alt 2 hd 64 sec 256>

End of procedure

Indicates connection

via "CM0"

Indicates connection

via "CM1"