Brother DCP-130C Panduan Pengaturan Cepat - Halaman 10
Jelajahi secara online atau unduh pdf Panduan Pengaturan Cepat untuk Perangkat lunak Brother DCP-130C. Brother DCP-130C 22 halaman. Windows vista
Juga untuk Brother DCP-130C: Lembar Spesifikasi (2 halaman), Panduan Pengaturan Cepat (22 halaman), Setup Manual (23 halaman), Panduan Pengaturan Cepat (24 halaman), Panduan Pengguna (47 halaman), Panduan Pengaturan Cepat (15 halaman)
Halaman Cetak
STEP1
Setting Up the Machine
5
Print quality check
1
After the cleaning cycle is finished, the LCD
shows:
Set Paper and
Press Start
2
Make sure paper is loaded in the paper tray.
Press Color Start.
The machine starts printing the Print Quality
Check Sheet (only during initial ink cartridge
installation).
3
Check the quality of the four color blocks on the
sheet.
(black/ yellow/ cyan/ magenta)
Improper Setup
Avoid touching the printed surface of the
paper immediately after printing, the surface
may not be completely dry and may stain your
fingers.
4
The LCD shows:
Is Quality OK?
a Yes b No
8
q
q
5
Do one of the following:
If all lines are clear and visible, press a
(Yes) to finish the quality check.
If you can see missing short lines, press b
(No) and go to step 6.
OK
6
The LCD asks you if the print quality is OK for
black and color. Press a (Yes) or b (No) .
Black OK?
q
a Yes b No
Color OK?
q
a Yes b No
After pressing a (Yes) or b (No) for both black
and color, the LCD shows:
Start Cleaning?
q
a Yes b No
7
Press a (Yes), the machine will then start
cleaning the colors.
8
After cleaning is finished, press Color Start.
The machine starts printing the Print Quality
Check Sheet again and goes back to step 3.
6
Choosing your language
(Canada only)
1
Press Menu.
2
Press a or b to choose 0.Initial Setup
Press OK.
3
Press a or b to choose 0.Local Language
Press OK.
4
Press a or b to choose your language.
Language:English
5
Press OK.
6
Press Stop/Exit.
Poor