Brother DCP-130C Manual de configuração rápida - Página 10

Procurar online ou descarregar pdf Manual de configuração rápida para Software Brother DCP-130C. Brother DCP-130C 22 páginas. Windows vista
Também para Brother DCP-130C: Ficha de especificações (2 páginas), Manual de configuração rápida (22 páginas), Manual de configuração (23 páginas), Manual de configuração rápida (24 páginas), Manual do utilizador (47 páginas), Manual de configuração rápida (15 páginas)

Imprimir página
Brother DCP-130C Manual de configuração rápida
STEP1
Setting Up the Machine
5

Print quality check

1
After the cleaning cycle is finished, the LCD
shows:
Set Paper and
Press Start
2
Make sure paper is loaded in the paper tray.
Press Color Start.
The machine starts printing the Print Quality
Check Sheet (only during initial ink cartridge
installation).
3
Check the quality of the four color blocks on the
sheet.
(black/ yellow/ cyan/ magenta)
Improper Setup
Avoid touching the printed surface of the
paper immediately after printing, the surface
may not be completely dry and may stain your
fingers.
4
The LCD shows:
Is Quality OK?
a Yes b No
8
q
q
5
Do one of the following:
If all lines are clear and visible, press a
(Yes) to finish the quality check.
If you can see missing short lines, press b
(No) and go to step 6.
OK
6
The LCD asks you if the print quality is OK for
black and color. Press a (Yes) or b (No) .
Black OK?
q
a Yes b No
Color OK?
q
a Yes b No
After pressing a (Yes) or b (No) for both black
and color, the LCD shows:
Start Cleaning?
q
a Yes b No
7
Press a (Yes), the machine will then start
cleaning the colors.
8
After cleaning is finished, press Color Start.
The machine starts printing the Print Quality
Check Sheet again and goes back to step 3.
6
Choosing your language
(Canada only)
1
Press Menu.
2
Press a or b to choose 0.Initial Setup
Press OK.
3
Press a or b to choose 0.Local Language
Press OK.
4
Press a or b to choose your language.
Language:English
5
Press OK.
6
Press Stop/Exit.
Poor