Brother MFC-J425W Panduan Pengguna Tingkat Lanjut - Halaman 25

Jelajahi secara online atau unduh pdf Panduan Pengguna Tingkat Lanjut untuk Perangkat lunak Brother MFC-J425W. Brother MFC-J425W 47 halaman. Product safety guide - spanish
Juga untuk Brother MFC-J425W: Spesifikasi Teknis (2 halaman), Manual (12 halaman), Manual (21 halaman), Panduan Keamanan Produk (17 halaman), Panduan Pengaturan Cepat (37 halaman), Panduan Keselamatan (17 halaman), Panduan Pengaturan Cepat (37 halaman), Manual (Spanyol) (21 halaman), Manual (Spanyol) (16 halaman)

Halaman Cetak
Brother MFC-J425W Panduan Pengguna Tingkat Lanjut
Setting up Groups for
Broadcasting
Groups, which can be stored on a Speed Dial
location, allow you to send the same fax
message to many fax numbers by pressing
(Speed Dial), Search, OK, the two-digit
location and Black Start.
First, you'll need to store each fax number in
a Speed Dial location.
(uuBasic User's Guide: Storing Speed Dial
numbers)
Then you can include them as numbers in the
Group. Each Group uses up a Speed Dial
location. You can have up to six Groups, or
you can assign up to 39 numbers to a large
Group.
(See Broadcasting (Black & White only)
uu page 11.)
a
Press
(Speed Dial).
b
Press a or b to choose Setup Groups.
Press OK.
c
Press a or b to choose GROUP1,
GROUP2, GROUP3, GROUP4, GROUP5 or
GROUP6 for the Group name where you
will store the fax numbers.
Press OK.
d
Press a or b to choose the 2-digit
Speed Dial location where you want to
store the Group.
Press OK.
e
If you want to change the Group name,
press a or b to choose
Change Group Name and press OK.
Then enter the new Group name and
press OK.
f
Press a or b to choose Add Number.
Press OK.
g
To add numbers to the Group, press
a or b to choose
Alphabetical Order or
5
Numerical Order and press OK.
Press a or b to select a number and
press OK.
h
Do one of the following:
To add another number to the Group,
repeat steps f to g.
If you are finished adding numbers to
the Group, press a or b to choose
Complete.
Press OK.
i
Do one of the following:
To store another Group for
broadcasting, repeat steps c to h.
To finish storing Groups for
broadcasting, press Stop/Exit.
Note
You can print a list of all the Speed Dial
numbers. Group numbers will be marked
in the GROUP column. (See Reports
uu page 24.)
Dialing and storing numbers
5
21