Brother MFC-J425W Panduan Pengguna Tingkat Lanjut - Halaman 27

Jelajahi secara online atau unduh pdf Panduan Pengguna Tingkat Lanjut untuk Perangkat lunak Brother MFC-J425W. Brother MFC-J425W 47 halaman. Product safety guide - spanish
Juga untuk Brother MFC-J425W: Spesifikasi Teknis (2 halaman), Manual (12 halaman), Manual (21 halaman), Panduan Keamanan Produk (17 halaman), Panduan Pengaturan Cepat (37 halaman), Panduan Keselamatan (17 halaman), Panduan Pengaturan Cepat (37 halaman), Manual (Spanyol) (21 halaman), Manual (Spanyol) (16 halaman)

Halaman Cetak

Brother MFC-J425W Panduan Pengguna Tingkat Lanjut

Printing reports

Fax reports

Use the Menu keys to set up the

Transmission Verification Report and the

Journal Period.

Transmission Verification

Report

You can use the Transmission Verification

Report as proof that you sent a fax.

(uuBasic User's Guide: Transmission

Verification Report)

Fax Journal (activity report)

You can set the machine to print a journal at

specific intervals (every 50 faxes, 6, 12 or

24 hours, 2 or 7 days). If you set the interval

to Off, you can still print the report by

following the steps in How to print a report

uu page 24. The factory setting is

Every 50 Faxes.

Press Menu.

Press a or b to choose Fax.

Press OK.

Press a or b to choose

Report Setting.

Press OK.

Press a or b to choose

Journal Period.

Press OK.

Press a or b to choose an interval.

Press OK.

If you choose Every 50 Faxes, go to

step h.



6, 12, 24 hours, 2 or 7 days

The machine will print the report at

the chosen time and then erase all

jobs from its memory. If the

machine's memory becomes full with

200 jobs before the time you chose

has passed, the machine will print

the Journal early and then erase all

jobs from the memory. If you want an

extra report before it is due to print,

you can print it without erasing the

jobs from the memory.



Every 50 Faxes

The machine will print the Journal

when the machine has stored

50 jobs.

Enter the time to start printing in 24-hour

format.

Press OK.

(For example: enter 19:45 for 7:45 PM.)

Note

When you set 12h Clock in the

Date&Time setting in Initial Setup,

enter the time in 12-hour format.

If you chose Every 7 Days in step e,

press a or b to display the days of the

week. Then choose the day you want to

be the first day of the 7-day countdown.

Press OK.

Press Stop/Exit.