Brother MFC-J425W Panduan Pengguna Tingkat Lanjut - Halaman 29

Jelajahi secara online atau unduh pdf Panduan Pengguna Tingkat Lanjut untuk Perangkat lunak Brother MFC-J425W. Brother MFC-J425W 47 halaman. Product safety guide - spanish
Juga untuk Brother MFC-J425W: Spesifikasi Teknis (2 halaman), Manual (12 halaman), Manual (21 halaman), Panduan Keamanan Produk (17 halaman), Panduan Pengaturan Cepat (37 halaman), Panduan Keselamatan (17 halaman), Panduan Pengaturan Cepat (37 halaman), Manual (Spanyol) (21 halaman), Manual (Spanyol) (16 halaman)

Halaman Cetak

Brother MFC-J425W Panduan Pengguna Tingkat Lanjut

Making copies

Copy settings

You can change the copy settings temporarily

for the next copy.

These settings are temporary. The machine

returns to its default settings 1 minute after

copying unless you have set the Mode Timer

to 30 seconds or less. (See Mode Timer

uu page 5.)

To change a setting, press COPY and then

press a or b to scroll through the copy

settings. When the setting you want is

highlighted, press OK.

When you are finished choosing settings,

press Black Start or Color Start.

Note

You can save some of the settings that

you use most often by setting them as

default. These settings will stay until you

change them again. (See Setting your

changes as the new default uu page 29.)

Stop copying

To stop copying, press Stop/Exit.

Changing copy quality

You can choose from a range of quality. The

factory setting is Normal.



Fast

Fast copy speed and lowest amount of ink

used. Use to save time printing

documents to be proof-read, large

documents or many copies.



Normal

Normal is the recommended mode for

ordinary printouts. This produces good

copy quality with good copy speed.



Best

Use Best mode to copy precise images

such as photographs. This provides the

highest resolution and slowest speed.

Press

Load your document.

Enter the number of copies you want.

Press a or b to choose Quality.

Press OK.

Press a or b to choose Fast, Normal or

Best.

Press OK.

If you do not want to change additional

settings, press Black Start or

Color Start.

(COPY).