Brother MFC-J430w Panduan Pengguna - Halaman 17

Jelajahi secara online atau unduh pdf Panduan Pengguna untuk Perangkat lunak Brother MFC-J430w. Brother MFC-J430w 40 halaman. Product safety guide - spanish
Juga untuk Brother MFC-J430w: Panduan Pengguna Tingkat Lanjut (47 halaman), Manual (12 halaman), Manual (21 halaman), Panduan Keamanan Produk (17 halaman), Panduan Pengaturan Cepat (37 halaman), Panduan Keselamatan (17 halaman), Panduan Pengaturan Cepat (37 halaman), Panduan Pengguna (41 halaman), Panduan Memulai Cepat (37 halaman), Panduan Memulai Cepat (22 halaman), Manual (Spanyol) (21 halaman), Manual (Spanyol) (16 halaman)

Halaman Cetak

Dialling and storing numbers

Additional dialling

operations

Combining Quick Dial

numbers

Sometimes, you may want to choose from

several long distance carriers when you send

a fax. Rates may vary depending on the time

and destination. To take advantage of low

rates, you can store the access codes of long-

distance carriers and credit card numbers as

Speed Dial numbers. You can store these

long dialling sequences by dividing them and

setting them up as separate Speed Dial

numbers in any combination. You can even

include manual dialling using the dial pad.

(uuBasic User's Guide: Storing Speed Dial

numbers)

For example, you might have stored "01632"

on Speed Dial: 03 and "960555" on

Speed Dial: 02. You can use them both to dial

"01632-960555" if you press the following

keys:

Press

(Speed Dial).

Press a or b to choose Search.

Press OK.

Enter 03.

Press a or b to choose Speed Dial.

Press OK.

Press a or b to choose Search.

Press OK.

Enter 02.

Press Mono Start or Colour Start.

You will dial "01632-960555".

To temporarily change a number, you can

substitute part of the number with manual

dialling using the dial pad. For example, to

change the number to 01632-960556 you

could press

(Speed Dial), choose

Search, press 03 and then press 960556

using the dial pad.

Note

If you must wait for another dial tone or

signal at any point in the dialling

sequence, create a pause in the number

by pressing Redial/Pause. Each key

press adds a 3.5-second delay.