Brother MFC-J430w Kullanıcı Kılavuzu - Sayfa 17

Yazılım Brother MFC-J430w için çevrimiçi göz atın veya pdf Kullanıcı Kılavuzu indirin. Brother MFC-J430w 40 sayfaları. Product safety guide - spanish
Ayrıca Brother MFC-J430w için: Gelişmiş Kullanıcı Kılavuzu (47 sayfalar), Manuel (12 sayfalar), Manuel (21 sayfalar), Ürün Güvenlik Kılavuzu (17 sayfalar), Hızlı Kurulum Kılavuzu (37 sayfalar), Güvenlik Kılavuzu (17 sayfalar), Hızlı Kurulum Kılavuzu (37 sayfalar), Kullanıcı Kılavuzu (41 sayfalar), Hızlı Başlangıç Kılavuzu (37 sayfalar), Hızlı Başlangıç Kılavuzu (22 sayfalar), (İspanyolca) El Kitabı (21 sayfalar), (İspanyolca) El Kitabı (16 sayfalar)

Sayfayı Yazdır
Brother MFC-J430w Kullanıcı Kılavuzu
5

Dialling and storing numbers

Additional dialling
operations
Combining Quick Dial
numbers
Sometimes, you may want to choose from
several long distance carriers when you send
a fax. Rates may vary depending on the time
and destination. To take advantage of low
rates, you can store the access codes of long-
distance carriers and credit card numbers as
Speed Dial numbers. You can store these
long dialling sequences by dividing them and
setting them up as separate Speed Dial
numbers in any combination. You can even
include manual dialling using the dial pad.
(uuBasic User's Guide: Storing Speed Dial
numbers)
For example, you might have stored "01632"
on Speed Dial: 03 and "960555" on
Speed Dial: 02. You can use them both to dial
"01632-960555" if you press the following
keys:
a
Press
(Speed Dial).
b
Press a or b to choose Search.
Press OK.
c
Enter 03.
d
Press a or b to choose Speed Dial.
Press OK.
e
Press a or b to choose Search.
Press OK.
f
Enter 02.
g
Press Mono Start or Colour Start.
You will dial "01632-960555".
To temporarily change a number, you can
substitute part of the number with manual
dialling using the dial pad. For example, to
5
change the number to 01632-960556 you
could press
(Speed Dial), choose
Search, press 03 and then press 960556
using the dial pad.
5
Note
If you must wait for another dial tone or
signal at any point in the dialling
sequence, create a pause in the number
by pressing Redial/Pause. Each key
press adds a 3.5-second delay.
5
5
13