Brother Pacesetter MacBroidery Manual - Halaman 5
Jelajahi secara online atau unduh pdf Manual untuk Perangkat lunak Brother Pacesetter MacBroidery. Brother Pacesetter MacBroidery 11 halaman. Embroidery lettering software – fonts
Juga untuk Brother Pacesetter MacBroidery: Manual (14 halaman), Manual (48 halaman)
Halaman Cetak
5
Pacesetter MacBroidery™ Embroidery Lettering Software – Recipes
Leather
Embroidery Designs for leather should be carefully chosen. Open designs with no underlay and low
stitch counts will provide the best results. Because it is very likely that hooping leather will leave marks it
is advisable to hoop the stabilizer and then adhere the leather on top.
Fabric Thickness: Medium to Heavy
Fabric Stretch: Light to a lot
Needle:
Size 14 leather needle
Thread:
Polyester embroidery thread
Stabilizer:
SA5815 Tear-Away Medium Weight Adhesive Stabilizer
Lycra
The stretch of Lycra fabrics can vary from a little to a lot. To keep stretching to a minimum designs with
lower stitch counts work best. If the embroidery design is more detailed the fabric could begin to
pucker or ripple. To minimize stretching the fabric first hoop the stabilizer and then adhere the Lycra on
top. Then place a piece of cut away stabilizer under the hoop. It is recommended that designs to be
sewn on Lycra projects always be tested on the fabric before embroidering the final project.
Fabric Thickness: Medium
Fabric Stretch: A lot
Needle:
Stretch needle, Size 12
Thread:
Polyester machine thread
Stabilizer:
SA5906 Lightweight Adhesive back water soluble Stabilizer
SA5929 Cut-Away Heavy Weight Stabilizer