Brother ADS-1100W Panduan Pengaturan Cepat - Halaman 25

Jelajahi secara online atau unduh pdf Panduan Pengaturan Cepat untuk Pemindai Brother ADS-1100W. Brother ADS-1100W 35 halaman.

Product Safety Guide

Make sure that one end of the power cord is firmly plugged into a standard power outlet and the other

end is plugged into the adapter block firmly. Do not use a power socket that is loose. If the power cord

is not completely plugged into the power outlet and adapter block, there is a danger of the adapter

becoming hot and catching fire.

Always use the supplied AC adapter, and plug the adapter into a power socket within the voltage range

indicated on Specifications in the User's Guide. Failure to do so may result in injury to yourself or

others, or damage to the machine or other property. Brother does not assume any responsibility for

any accident or damage resulting from not using the supplied AC adapter.

DO NOT connect the supplied AC adapter to other products.

DO NOT overload the AC adapter.

If you do not intend using the unit for an extended period of time, disconnect the AC adapter from the

power outlet.

Servicing the unit

DO NOT attempt to service the unit yourself. Opening or removing covers may expose you to dangerous voltages

and other risks, and may void your warranty. Contact your Brother dealer or Brother Customer Service.

WARNING

If the unit has been dropped or the casing has been damaged, there may be the possibility of an electric

shock or a fire. Unplug the unit from the power socket and contact your Brother dealer or Brother

Customer Service.

CAUTION

If the unit becomes unusually hot, releases smoke, generates any strong smells, or if you accidentally spill any

liquid on it, immediately unplug the unit from the electrical socket. Contact your Brother dealer or Brother

Customer Service.

IMPORTANT

If the machine does not operate normally when the operating instructions are followed, adjust only those

controls that are covered by the operating instructions. Incorrect adjustment of other controls may result in

damage, and will often require extensive work by a qualified technician to restore the unit to normal operation.