Brother ADS-1100W Panduan Pengaturan Cepat - Halaman 27
Jelajahi secara online atau unduh pdf Panduan Pengaturan Cepat untuk Pemindai Brother ADS-1100W. Brother ADS-1100W 35 halaman.
Halaman Cetak
Product Safety Guide
Important Information for New Zealand
Important Safety Instructions
1 Read all of these instructions.
2 Save them for later reference.
3 Follow all warnings and instructions marked on the machine.
4 Unplug this machine from the wall outlet before cleaning the outside of the machine. Do not use liquid or
aerosol cleaners. Use a damp cloth for cleaning.
5 Do not place this machine on an unstable surface, stand, or table. The machine may fall, causing serious
damage to the machine.
6 Slots and openings in the cabinet and the back or bottom are provided for ventilation; to ensure reliable
operation of the machine and to protect it from overheating, these openings must not be blocked or covered.
The openings should never be blocked by placing the machine on a bed, sofa, rug, or other similar surface.
This machine should never be placed near or over a radiator or heater. This machine should not be placed in
a built-in installation unless proper ventilation is provided.
7 This machine should be connected to an AC power source within the range indicated on Specifications in the
User's Guide. Do not connect it to a DC power source. If you are not sure, contact a qualified electrician.
8 Do not place anything on top of the power cord including this machine. Do not allow the power cord to be
stepped on.
9 Do not place anything in front of the machine that will block scanned documents. Do not place anything in the
path of documents.
10 Do not touch a document during scanning.
11 Never push objects of any kind into this machine through cabinet slots, since they may touch dangerous
voltage points or short out parts resulting in a risk of fire or electric shock. Never spill liquid of any kind on the
machine.
12 Do not attempt to service this machine yourself. Opening or removing covers may expose you to dangerous
voltage points and/or other risks. Refer all servicing to service personnel.
13 Unplug this machine from the mains power, and refer servicing to qualified Service Personnel under the
following conditions:
If the power cord is damaged or frayed.
If liquid has been spilled into the machine.
If the machine has been exposed to rain or water.
If the machine does not operate normally when the operating instructions are followed. Adjust only those
controls that are covered by the operating instructions. Incorrect adjustment of other controls may result in
damage and will often require extensive work by a qualified technician to restore the machine to normal
operation.
If the machine has been dropped or the cabinet has been damaged.
If the machine exhibits a distinct change in performance, indicating a need for service.
27