Fujitsu D1170 Panduan Teknis - Halaman 20
Jelajahi secara online atau unduh pdf Panduan Teknis untuk Motherboard Fujitsu D1170. Fujitsu D1170 22 halaman. Mainboard
Add-on modules
Upgrading main memory
These slots are suitable for memory modules with 16, 32, 64, 128 and 256 Mbyte of the DIMM
format. Therefore the memory capacity of one component on the memory module may not exceed
128 Mbit (= 16 MB). Memory modules with different memory capacities can be combined.
You may only use unbuffered 3.3 V memory modules. Buffered memory modules are not
!
supported.
SDRAM memory modules must be designed for a clock frequency of 100 MHz (meets
PC100 specification).
Installing a memory module
2
Ê
Push the holders on each side of the memory compartment outwards.
Ê
Insert the memory module into the location.
Watch the coding of the memory module when doing so.
Ê
At the same time flip the lateral holders upwards until the memory module snaps in place.
Removing a memory module
1
Ê
Flip the holders to the right and left of the location outwards.
Ê
Pull the memory module out of its location.
12 - English
2
1
A26361-D1170-Z120-5-7419