Fujitsu D1170 Manuel technique - Page 20

Parcourez en ligne ou téléchargez le pdf Manuel technique pour {nom_de_la_catégorie} Fujitsu D1170. Fujitsu D1170 22 pages. Mainboard

Add-on modules

Upgrading main memory

These slots are suitable for memory modules with 16, 32, 64, 128 and 256 Mbyte of the DIMM

format. Therefore the memory capacity of one component on the memory module may not exceed

128 Mbit (= 16 MB). Memory modules with different memory capacities can be combined.

You may only use unbuffered 3.3 V memory modules. Buffered memory modules are not

supported.

SDRAM memory modules must be designed for a clock frequency of 100 MHz (meets

PC100 specification).

Installing a memory module

Push the holders on each side of the memory compartment outwards.

Insert the memory module into the location.

Watch the coding of the memory module when doing so.

At the same time flip the lateral holders upwards until the memory module snaps in place.

Removing a memory module

Flip the holders to the right and left of the location outwards.

Pull the memory module out of its location.

12 - English

A26361-D1170-Z120-5-7419