Fujitsu D3031 Panduan Teknis - Halaman 35

Jelajahi secara online atau unduh pdf Panduan Teknis untuk Motherboard Fujitsu D3031. Fujitsu D3031 38 halaman. System board for primergy rx200 s6

Features

Proceed as follows to delete the CMOS settings:

Ê Create a backup of all the data.

Ê Shut down the server.

Ê Remove all power and peripheral cables.

Ê Remove the fan cover and the housing cover.

Ê If necessary, remove the expansion card that prevents access to jumper JP2

(Clear CMOS).

Ê Remove jumper JP2 from position 1-2 and insert it in position 2-3 for 20 to

30 seconds.

Ê Insert jumper JP2 in position 1-2 again.

Ê Reinsert the expansion card.

Ê Reinstall the housing cover and the fan cover.

Ê Connect all the power and peripheral cables again.

Ê Switch the server on again.

Ê During the POST process press [F2] in order to enter the Setup Utility.

Ê Press [F9] to set the system defaults.

Ê Press [F10] to save your changes and to exit the Setup Utility.

Protect RTC jumper - JP5

Jumper

D3031 (RX200 S6)

Pos.

Description

Normal operation (default setting)

1-2

2-3

Clear ME_RTC REG

Technical Manual

Settings