- ページ 35

マザーボード Fujitsu D3031のPDF テクニカル・マニュアルをオンラインで閲覧またはダウンロードできます。Fujitsu D3031 38 ページ。 System board for primergy rx200 s6

Features

Proceed as follows to delete the CMOS settings:

Ê Create a backup of all the data.

Ê Shut down the server.

Ê Remove all power and peripheral cables.

Ê Remove the fan cover and the housing cover.

Ê If necessary, remove the expansion card that prevents access to jumper JP2

(Clear CMOS).

Ê Remove jumper JP2 from position 1-2 and insert it in position 2-3 for 20 to

30 seconds.

Ê Insert jumper JP2 in position 1-2 again.

Ê Reinsert the expansion card.

Ê Reinstall the housing cover and the fan cover.

Ê Connect all the power and peripheral cables again.

Ê Switch the server on again.

Ê During the POST process press [F2] in order to enter the Setup Utility.

Ê Press [F9] to set the system defaults.

Ê Press [F10] to save your changes and to exit the Setup Utility.

Protect RTC jumper - JP5

Jumper

D3031 (RX200 S6)

Pos.

Description

Normal operation (default setting)

1-2

2-3

Clear ME_RTC REG

Technical Manual

Settings