Fujitsu F2MC-8FX Series Panduan Pengoperasian - Halaman 7

Jelajahi secara online atau unduh pdf Panduan Pengoperasian untuk Motherboard Fujitsu F2MC-8FX Series. Fujitsu F2MC-8FX Series 20 halaman. 8-bit microcontroller
Juga untuk Fujitsu F2MC-8FX Series: Catatan Aplikasi (12 halaman), Catatan Aplikasi (23 halaman), Setup Manual (18 halaman), Setup Manual (19 halaman), Setup Manual (30 halaman), Catatan Aplikasi (20 halaman), Catatan Aplikasi (21 halaman), Panduan Pengoperasian (21 halaman), Setup Manual (23 halaman), Panduan Pengguna (24 halaman), Setup Manual (17 halaman)

3. Connections

■ Connecting the MCU board to the header board

Align the MCU board the header board facing each other, then plug their mating connectors together.

Those connectors are provided with incorrect insertion prevention guards located diagonally. Posi-

tion the two boards so that the incorrect insertion prevention guards do not interfere with each other

and plug the connectors together completely (see "Figure 3").

■ Connecting the MCU board to the BGM adapter

Connect the BGM adapter to the MCU board. Plug the BGM adapter's interface connector complete-

ly into the BGM adapter connector on the MCU board such that the index marks (▼) aligned (see

"Figure 4").

BGM adapter

* : Be sure to connect the BGM adapter correctly to the BGM adapter connector (CN3) on the MCU board.

It can damage the MCU board if it is accidentally connected to the LVD2 detection voltage selector jumper

plug (S2).

Figure 3 Connection of MCU board and header board

Figure 4 Connection of MCU board and BGM adapter

Incorrect insertion

prevention guard

BGM adapter connector (CN3)

Index mark

MCU board

Header board

MCU board

SUB CLOCK

CLK

CLK S.V.

APB8

X0A

X1A

MAIN CLOCK

LVD1

OFF

LVD2 detection voltage

selector jumper plug (S2) *

LVD4

LVD3

LVD2

LVD1

LVD0

LVD2