Fujitsu F2MC-8FX Series Manual de operação - Página 7

Procurar online ou descarregar pdf Manual de operação para Placa-mãe Fujitsu F2MC-8FX Series. Fujitsu F2MC-8FX Series 20 páginas. 8-bit microcontroller
Também para Fujitsu F2MC-8FX Series: Nota de aplicação (12 páginas), Nota de aplicação (23 páginas), Manual de configuração (18 páginas), Manual de configuração (19 páginas), Manual de configuração (30 páginas), Nota de aplicação (20 páginas), Nota de aplicação (21 páginas), Manual de operação (21 páginas), Manual de configuração (23 páginas), Manual do utilizador (24 páginas), Manual de configuração (17 páginas)

3. Connections

■ Connecting the MCU board to the header board

Align the MCU board the header board facing each other, then plug their mating connectors together.

Those connectors are provided with incorrect insertion prevention guards located diagonally. Posi-

tion the two boards so that the incorrect insertion prevention guards do not interfere with each other

and plug the connectors together completely (see "Figure 3").

■ Connecting the MCU board to the BGM adapter

Connect the BGM adapter to the MCU board. Plug the BGM adapter's interface connector complete-

ly into the BGM adapter connector on the MCU board such that the index marks (▼) aligned (see

"Figure 4").

BGM adapter

* : Be sure to connect the BGM adapter correctly to the BGM adapter connector (CN3) on the MCU board.

It can damage the MCU board if it is accidentally connected to the LVD2 detection voltage selector jumper

plug (S2).

Figure 3 Connection of MCU board and header board

Figure 4 Connection of MCU board and BGM adapter

Incorrect insertion

prevention guard

BGM adapter connector (CN3)

Index mark

MCU board

Header board

MCU board

SUB CLOCK

CLK

CLK S.V.

APB8

X0A

X1A

MAIN CLOCK

LVD1

OFF

LVD2 detection voltage

selector jumper plug (S2) *

LVD4

LVD3

LVD2

LVD1

LVD0

LVD2