Fujitsu F2MC-8FX Series Setup Manual - Halaman 12

Jelajahi secara online atau unduh pdf Setup Manual untuk Motherboard Fujitsu F2MC-8FX Series. Fujitsu F2MC-8FX Series 30 halaman. 8-bit microcontroller
Juga untuk Fujitsu F2MC-8FX Series: Panduan Pengoperasian (20 halaman), Catatan Aplikasi (12 halaman), Catatan Aplikasi (23 halaman), Setup Manual (18 halaman), Setup Manual (19 halaman), Catatan Aplikasi (20 halaman), Catatan Aplikasi (21 halaman), Panduan Pengoperasian (21 halaman), Setup Manual (23 halaman), Panduan Pengguna (24 halaman), Setup Manual (17 halaman)

■ Connecting Oscillators

Plug crystal/ceramic oscillators into the crystal oscillator mounting sockets (one for the main clock

and the other for the subclock) on the MCU Board (See "Figure 5 Connection of oscillators") .

You can see one crystal oscillator mounting socket for main clock and the other for subclock on the

MCU Board. Mount a crystal or ceramic oscillator and a capacitor on the MCU Board.

GNDVCC

PRODUCT SELECT

(2)

(1) Crystal oscillator mounting socket for main clock

Mount a crystal oscillator used as "main clock".

(2) Crystal oscillator mounting socket for subclock

Mount a crystal oscillator used as "subclock".

If you disable the subclock, set the "CLK" switch to "ON".

Capacitor mounting socket

Crystal oscillator mounting socket

Figure 5 Connection of oscillators

1 2 3 4

BGM

ADAPTER

GND

Capacitor mounting socket

(1)

Ceramic

Crystal

oscillator