Fujitsu F2MC-8FX Series Kurulum Kılavuzu - Sayfa 12

Anakart Fujitsu F2MC-8FX Series için çevrimiçi göz atın veya pdf Kurulum Kılavuzu indirin. Fujitsu F2MC-8FX Series 30 sayfaları. 8-bit microcontroller
Ayrıca Fujitsu F2MC-8FX Series için: Kullanım Kılavuzu (20 sayfalar), Uygulama Notu (12 sayfalar), Uygulama Notu (23 sayfalar), Kurulum Kılavuzu (18 sayfalar), Kurulum Kılavuzu (19 sayfalar), Uygulama Notu (20 sayfalar), Uygulama Notu (21 sayfalar), Kullanım Kılavuzu (21 sayfalar), Kurulum Kılavuzu (23 sayfalar), Kullanıcı Kılavuzu (24 sayfalar), Kurulum Kılavuzu (17 sayfalar)

Fujitsu F2MC-8FX Series Kurulum Kılavuzu
■ Connecting Oscillators
Plug crystal/ceramic oscillators into the crystal oscillator mounting sockets (one for the main clock
and the other for the subclock) on the MCU Board (See "Figure 5 Connection of oscillators") .
You can see one crystal oscillator mounting socket for main clock and the other for subclock on the
MCU Board. Mount a crystal or ceramic oscillator and a capacitor on the MCU Board.
GNDVCC
8
PRODUCT SELECT
(2)
(1) Crystal oscillator mounting socket for main clock
Mount a crystal oscillator used as "main clock".
(2) Crystal oscillator mounting socket for subclock
Mount a crystal oscillator used as "subclock".
If you disable the subclock, set the "CLK" switch to "ON".
Capacitor mounting socket
Crystal oscillator mounting socket
Figure 5 Connection of oscillators
5V
ON
ON
1 2 3 4
1 2 3 4
C
B
A
BGM
ADAPTER
GND
Capacitor mounting socket
3V
1
2
(1)
Ceramic
Crystal
oscillator
oscillator
7