Fujitsu F2MC-8FX Series Setup Manual - Halaman 14

Jelajahi secara online atau unduh pdf Setup Manual untuk Motherboard Fujitsu F2MC-8FX Series. Fujitsu F2MC-8FX Series 17 halaman. 8-bit microcontroller
Juga untuk Fujitsu F2MC-8FX Series: Panduan Pengoperasian (20 halaman), Catatan Aplikasi (12 halaman), Catatan Aplikasi (23 halaman), Setup Manual (18 halaman), Setup Manual (19 halaman), Setup Manual (30 halaman), Catatan Aplikasi (20 halaman), Catatan Aplikasi (21 halaman), Panduan Pengoperasian (21 halaman), Setup Manual (23 halaman), Panduan Pengguna (24 halaman)

2.4 HW Module Description

Input external power supply from outside. Please read the following instructions before

using.

Output voltage: 5V

Output Current: 500mA

Connection: Power connector (DC IN)

2.4.2

To start debugging using a BGMA, users can connect IDC10 socket from the BGMA to

BGMA IF on an EV board before power on.

2.4.3

All MCU ports are easy accessible through test pins.

2.4.4

The EV board can be connected to MB95330 EV board through the four 8-pin connectors.

Then the EV board can support 120 degree inverter motor driving solution.

EV BOARD MB2146-441-E V1.0

Chapter 2 EV Board Introduction

MCU-AN-500092-E-10 – Page 12