Fujitsu F2MC-8FX Series Installatiehandleiding - Pagina 14

Blader online of download pdf Installatiehandleiding voor {categorie_naam} Fujitsu F2MC-8FX Series. Fujitsu F2MC-8FX Series 17 pagina's. 8-bit microcontroller
Ook voor Fujitsu F2MC-8FX Series: Bedieningshandleiding (20 pagina's), Toepassingsnotitie (12 pagina's), Toepassingsnotitie (23 pagina's), Installatiehandleiding (18 pagina's), Installatiehandleiding (19 pagina's), Installatiehandleiding (30 pagina's), Toepassingsnotitie (20 pagina's), Toepassingsnotitie (21 pagina's), Bedieningshandleiding (21 pagina's), Installatiehandleiding (23 pagina's), Gebruikershandleiding (24 pagina's)

2.4 HW Module Description

Input external power supply from outside. Please read the following instructions before

using.

Output voltage: 5V

Output Current: 500mA

Connection: Power connector (DC IN)

2.4.2

To start debugging using a BGMA, users can connect IDC10 socket from the BGMA to

BGMA IF on an EV board before power on.

2.4.3

All MCU ports are easy accessible through test pins.

2.4.4

The EV board can be connected to MB95330 EV board through the four 8-pin connectors.

Then the EV board can support 120 degree inverter motor driving solution.

EV BOARD MB2146-441-E V1.0

Chapter 2 EV Board Introduction

MCU-AN-500092-E-10 – Page 12