Fujitsu F2MC-8FX Series Installatiehandleiding - Pagina 15

Blader online of download pdf Installatiehandleiding voor {categorie_naam} Fujitsu F2MC-8FX Series. Fujitsu F2MC-8FX Series 17 pagina's. 8-bit microcontroller
Ook voor Fujitsu F2MC-8FX Series: Bedieningshandleiding (20 pagina's), Toepassingsnotitie (12 pagina's), Toepassingsnotitie (23 pagina's), Installatiehandleiding (18 pagina's), Installatiehandleiding (19 pagina's), Installatiehandleiding (30 pagina's), Toepassingsnotitie (20 pagina's), Toepassingsnotitie (21 pagina's), Bedieningshandleiding (21 pagina's), Installatiehandleiding (23 pagina's), Gebruikershandleiding (24 pagina's)

3 Development Platform Quick Start

Start the debugging system in the following sequence:

Connect a BGMA to the PC using a USB cable, confirm the LED on the BGMA is Green;

Connect an EV board to BGMA IDC10 socket;

Power on EV board power supply, confirm the LED on the BGMA is orange.

Users can start a debug from a PC software SOFTUNE workbench in the following

sequence. Here take IO_TEST project as example.

Start the SOFTUNE by selecting Programs > SOFTUNE V3 > FFMC-8L Family

SOFTUNE Workbench from Start Menu;

Click Open workspace from File Menu in SOFTUNE;

Select IO_TEST.wsp in Open Space window;

Click Start debug from Debug Menu.

If the entire procedure goes right, a debug will start normally.

EV BOARD MB2146-441-E V1.0

Chapter 3 Development Platform Quick Start

MCU-AN-500092-E-10 – Page 13