Indesit LFT 114 UK Panduan Servis - Halaman 12
Jelajahi secara online atau unduh pdf Panduan Servis untuk Mesin pencuci piring Indesit LFT 114 UK. Indesit LFT 114 UK 26 halaman. Platform eos. built in
Halaman Cetak
Sparkleing Rinse Agent check via LED
The administering of Sparkling-rinse agents on Model EOS is done through a "Magnetic Read"sensor, mounted right inside the
dispenser. It detects the presence or absence of the Sparkle-agent by means of a floating-ball. The User-Interface will read the
message and will transmit it directly to the Main-board; which in turn will decide whether or not it should switch the Led on or off
at the same time, informing the User-Interface of its decision.
Setting Hard-Water:
Whereas in the previous model, the "regenerating" process was done at the end of each washing-cycle (except in the soak-
cycle), on model EOS, the regenerating-process depends on the "settings/conditions" of the dishwasher.
Thus when first setting up the dishwasher or whenever the Main-board's being replaced, it's important to set the water-hardness
in order to prevent the resines used in the sweetening of the water from being used up and which would lead to bad functioning of
the dishwasher.
Dishwashers coming out from plants are on default and set on "3" and "30" for the French, and the "regenerating" cycle is done
every 65 litres that have been filled up.
Table on water-setting on 6 Led Dishwashers:
When using multi-functional tablets:
The water-hardness should always be indicated, as should be done whenever another type of detergent is being used;
when multifunctional tablets are being used, the salt-container should always be filled up.
It is recommended not to add salt from 0°f to 10°f.
HOW TO SET WATER-HARDNESS ON 6 LED
First check to see that the dishwahser is not on and that the door is open.
1.
Switch on the dishwasher on "Power On".
2.
Soon after, press button "P" and keep pressed for about 6 seconds. A number relating to the level that as been set will
come on display.
3.
By pressing button "P", the water-hardness may be modified: 1-2-3-4-5; and by keeping it pressed it will go back
repeating 1-2-3-4-5-12-3-...etc.
4.
Once the selection has been made, a further 10 seconds must be waited till the machine takes up the reading
automatically.
Table on water-setting on 6 Led Dishwashers:
The water-hardness should always be indicated, as should be done whenever another type of detergent is being used;
when multifunctional tablets are being used, the salt-container should always be filled up.
It is recommended not to add salt from 0°f to 10°f.
(°d=water-hardness(German grade )°f= water-hardness (French grades-mmol/litre
Service Manual
Manual LFT 114 - 116 - 216
Edition
2007.10.15
12
Language
English