AEG A81000TNW0 Panduan Pengguna - Halaman 15
Jelajahi secara online atau unduh pdf Panduan Pengguna untuk Pembeku AEG A81000TNW0. AEG A81000TNW0 20 halaman. Built in freezer
Juga untuk AEG A81000TNW0: Panduan Pengguna (20 halaman), Panduan Pengguna (36 halaman)
Location
The appliance should be installed well away from
sources of heat such as radiators, boilers, direct
sunlight etc. Ensure that air can circulate freely
around the back of the cabinet.To ensure best
performance, if the appliance is positioned below
an overhanging wall unit, the minimum distance
between the top of the cabinet and the wall unit
must be at least 100 mm . Ideally, however, the
appliance should not be positioned below over-
hanging wall units. Accurate levelling is ensured
by one or more adjustable feet at the base of the
cabinet. If the cabinet is placed in a corner and
the side with the hinges facing the wall, the dis-
tance between the wall and the cabinet must be at least 10 mm to allow the door to open
enough so that the shelves can be removed.
WARNING!
It must be possible to disconnect the appliance from the mains power supply; the plug
must therefore be easily accessible after installation.
Door reversibility
To carry out the following operations, we suggest that this be made with another person
that will keep a firm hold on the doors of the appliance during the operations.
To change the opening direction of the door, do these steps:
1.
Remove the plug from the power socket.
2.
Tilt back the appliance carefully so that the compressor cannot touch the floor.
3.
Unscrew both adjustable feet.
4.
Unscrew the screws of the door bottom
hinge.
5.
Take off the appliance door by pulling it
slightly downwards.
15
Installation