AEG ARCTIS Petunjuk Pengoperasian & Panduan Pemasangan - Halaman 25

Halaman Cetak

AEG ARCTIS Petunjuk Pengoperasian & Panduan Pemasangan

Symptom

Heavy build up of frost,

possibly also on the door

seal.

The compressor does not

start immediately after

changing the temperature

setting or pushing the fast

freeze button.

Noise

If after the above checks there is still a fault, call your local AEG Service

Force Centre.

In-guarantee customers should ensure that the above checks have been

made as the engineer will make a charge if the fault is not a

mechanical or electrical breakdown.

Please note that proof of purchase is required for in-guarantee service

calls.

Noises during Operation

The following noises are characteristic of refrigeration appliances:

• Clicks

Whenever the compressor switches on or off, a click can be heard.

• Humming

As soon as the compressor is in operation, you can hear it humming.

• Bubbling/Splashing

When refrigerant flows into thin tubes, you can hear bubbling or

splashing noises. Even after the compressor has been switched off,

this noise can be heard for a short time.

818 2113-00/4

Possible Cause

Door seal is not air tight

(possibly after changing

over the hinges).

This is normal, no error has

occurred.

Appliance is not level.

Appliance is in contact

with wall or other objects.

A part at the back of the

appliance, e.g. a tube, is in

contact with another

appliance part or the wall.

Solution

Carefully warm the leak-

ing sections of the door

seal with a hair dryer (not

hotter than approx. 50 °C).

At the same time shape the

warmed door seal by hand

such that it sits correctly.

The compressor starts after

a period of time.

Readjust the front levelling

feet.

Push appliance away a

short distance.

Bend this part away care-

fully if necessary.