AEG 220 D Panduan Petunjuk Pemasangan dan Pengoperasian - Halaman 16

Jelajahi secara online atau unduh pdf Panduan Petunjuk Pemasangan dan Pengoperasian untuk Kap Ventilasi AEG 220 D. AEG 220 D 17 halaman. Fume extractor hood

Halaman Cetak

Warning

Failure to observe the instructions on cleaning the unit

and changing the filters will cause a fire hazard. You are

therefore strongly recommended to follow these

instructions.

Changing the light bulb

Disconnect the unit from the mains power supply.

Remove the grid.

Replace the old light bulb with a new light bulb (40 W

max.).

If the light does not come on, make sure the bulb has

been screwed in correctly before contacting the technical

assistance service.

Cleaning

Warning: always disconnect the hood from the mains

power supply before cleaning it.

Never insert pointed objects in the motor's protective

grid.

Wash the outside surfaces using a delicate detergent

solution. Never use caustic detergents or abrasive brushes

or powders.

Only ever clean the switch panel and filter grille using a

damp cloth and delicate detergents.

It is extremely important to clean the unit and change the

filters at the recommended intervals. Failure to do so will

cause grease deposits to build up that could constitute a

fire hazard.