AEG 220 D 설치 및 운영 지침 매뉴얼 - 페이지 16

{카테고리_이름} AEG 220 D에 대한 설치 및 운영 지침 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. AEG 220 D 17 페이지. Fume extractor hood

Warning

Failure to observe the instructions on cleaning the unit

and changing the filters will cause a fire hazard. You are

therefore strongly recommended to follow these

instructions.

Changing the light bulb

Disconnect the unit from the mains power supply.

Remove the grid.

Replace the old light bulb with a new light bulb (40 W

max.).

If the light does not come on, make sure the bulb has

been screwed in correctly before contacting the technical

assistance service.

Warning: always disconnect the hood from the mains

power supply before cleaning it.

Never insert pointed objects in the motor's protective

grid.

Wash the outside surfaces using a delicate detergent

solution. Never use caustic detergents or abrasive brushes

or powders.

Only ever clean the switch panel and filter grille using a

damp cloth and delicate detergents.

It is extremely important to clean the unit and change the

filters at the recommended intervals. Failure to do so will

cause grease deposits to build up that could constitute a

fire hazard.