AEG CHDF 6260 Panduan Pengoperasian dan Instalasi - Halaman 16

Jelajahi secara online atau unduh pdf Panduan Pengoperasian dan Instalasi untuk Kap Ventilasi AEG CHDF 6260. AEG CHDF 6260 21 halaman. Electrolux cooktop user manual
Juga untuk AEG CHDF 6260: Petunjuk Pengoperasian dan Pemasangan (21 halaman), Petunjuk Pengoperasian dan Pemasangan (21 halaman), Panduan Pengoperasian dan Instalasi (22 halaman), Petunjuk Pengoperasian dan Pemasangan (23 halaman), Petunjuk Pengoperasian dan Pemasangan (22 halaman)

Outlet hole - Only for models DF 6260, DF 6260-ml/1

and CHDF 6260 (extractor-filter version)

• When used as an extractor unit, the hood must be fitted with a

150mm diameter hose.

Only for model DF 6260 - DF 6260-

ml/1: Should there already be a pipe

of diameter 125 mm that ducts to

the outside through the walls or roof,

it is possible to use the 150/125 mm

reduction flange provided. In this

case the hood will be slightly more

noisy.

Fix the flange on the hood outlet

hole, using 2 screws. Fig. 8a.

Filter version only

• Fix the deflector to the flange. Fig. 8b.

Outlet hole - Only for model DF 6160(extractor-filter version)

• When used as an extractor unit, the hood must be fitted with a

120mm diameter hose.

• The dimensions and position of the air outlet are given in figure 9.

• Fix the flange supplied as kit onto the exit hole (bayonet fixture).

• Using the adapter, Ø100, Ø110 and Ø125 mm exhausting pipes can

be used.

Ø 125 mm exhausting hose: insert the adapter on the flange and

remove, using a proper tool, the upper unused Ø 100 and Ø 110 mm

rings of the adapter.

Ø 110 mm exhausting pipe: same procedure, but removing

the Ø 100 mm ring only.

Ø 100 mm exhausting pipe: apply the adapter on the flange.

Fig. 9

Fig. 8a

Fig. 8b

Fig. 10