AEG CHDF 6260 Bedienings- en installatiehandleiding - Pagina 16

Blader online of download pdf Bedienings- en installatiehandleiding voor {categorie_naam} AEG CHDF 6260. AEG CHDF 6260 21 pagina's. Electrolux cooktop user manual
Ook voor AEG CHDF 6260: Bedienings- en installatie-instructies (21 pagina's), Bedienings- en installatie-instructies (21 pagina's), Bedienings- en installatiehandleiding (22 pagina's), Bedienings- en installatie-instructies (23 pagina's), Bedienings- en installatie-instructies (22 pagina's)

Outlet hole - Only for models DF 6260, DF 6260-ml/1

and CHDF 6260 (extractor-filter version)

• When used as an extractor unit, the hood must be fitted with a

150mm diameter hose.

Only for model DF 6260 - DF 6260-

ml/1: Should there already be a pipe

of diameter 125 mm that ducts to

the outside through the walls or roof,

it is possible to use the 150/125 mm

reduction flange provided. In this

case the hood will be slightly more

noisy.

Fix the flange on the hood outlet

hole, using 2 screws. Fig. 8a.

Filter version only

• Fix the deflector to the flange. Fig. 8b.

Outlet hole - Only for model DF 6160(extractor-filter version)

• When used as an extractor unit, the hood must be fitted with a

120mm diameter hose.

• The dimensions and position of the air outlet are given in figure 9.

• Fix the flange supplied as kit onto the exit hole (bayonet fixture).

• Using the adapter, Ø100, Ø110 and Ø125 mm exhausting pipes can

be used.

Ø 125 mm exhausting hose: insert the adapter on the flange and

remove, using a proper tool, the upper unused Ø 100 and Ø 110 mm

rings of the adapter.

Ø 110 mm exhausting pipe: same procedure, but removing

the Ø 100 mm ring only.

Ø 100 mm exhausting pipe: apply the adapter on the flange.

Fig. 9

Fig. 8a

Fig. 8b

Fig. 10