A-Neuvideo ANI-2PIP-LOGO Buku Petunjuk - Halaman 12

Jelajahi secara online atau unduh pdf Buku Petunjuk untuk Monitor A-Neuvideo ANI-2PIP-LOGO. A-Neuvideo ANI-2PIP-LOGO 15 halaman. 2x1 hdmi multiviewer
Juga untuk A-Neuvideo ANI-2PIP-LOGO: Buku Petunjuk (20 halaman)

Halaman Cetak

WebGUI Control

■ Priority: Selects which input channel is on top in the multi- windowing modes.

■ From Input: Selects the input to display when the unit is in the "NONE" (Full screen

seamless switcher) Windowing Mode.

• PRESET/FACTORY: Provides controls for saving and loading Presets and for resetting the unit.

■ Preset Save/Recall: This unit can store and recall up to four presets. Each preset stores

the settings from the Mode, Contrast, Brightness, Sharpness, Hue, image Still, Flip, and

Upside-Down sections of the WebGUI for rapid, hassle-free, recall.

NOTE: The output will briefly go black during the preset recall process.

■ Factory Reset: Click on the Factory Reset button to reset the unit to its factory default

state. After the reset is complete, the unit will reboot automatically.

NOTE: Network configuration details will not be reset.

ADJUSTMENT TAB:

This tab provides controls over the general display characteristics of each

input channel as well as providing a way to set.

• CONTRAST: Sets the contrast level for each input channel with a range of 0 to 100. Clicking on

the slider will allow fine adjustments using the arrow keys. The default value is 80.

• BRIGHTNESS: Sets the brightness level for each input channel with a range of 0 to 100. Clicking

on the slider will allow fine adjustments using the arrow keys. The default value is 50.

• SHARPNESS: Sets the amount of sharpness processing to apply to each input channel with

a range of 0 to 20. Clicking on the slider will allow fine adjustments using the arrow keys. The

default value is 10.

• HUE: Sets the hue value for each input channel with a range of 0 to 100. Clicking on the slider

will allow fine adjustments using the arrow keys. The default value is 50.

• OUTPUT RESOLUTION: Sets the unit's output resolution. The default selection is 1080p60.

• IMAGE STILL: Freezes and unfreezes the video from the selected input channel. This function

is off by default.

• FLIP: Enabling the Flip function will cause the video in the selected input channel to be mirrored

horizontally. This function is off by default.

• UP-SIDE DOWN: Enabling the Upside-Down function will cause the video in the selected input

channel to be mirrored vertically. This function is off by default.

WebGUI Control

WINDOWS SETUP TAB:

This tab provides access to controls for the individual windows in the

multi-windowing modes (PIP, SBS, POP) of the unit including size and position. Both windows may

be freely scaled and positioned in all 3 modes. Clicking on the bottom right corner of a window and

dragging it will resize the window while clicking and dragging the center of a window will reposition it.

Changes made to windows will occur immediately.

NOTE: This tab will be completely disabled if Window Mode is set to "NONE".

• SELECT: This section provides a way to directly type exact position and size numbers for each

channel window for precise alignment. After making all changes to a channel, please click the

"Save" button to have the unit use the new values.

■ Channel: Selects which channel to adjust.

■ Width: Sets the horizontal size of the selected channel window in pixels.

■ Height: Sets the vertical size of the selected channel window in pixels.

■ H Position: Sets the horizontal position of the selected channel window in pixels.

■ V Position: Sets the vertical position of the selected channel window in pixels.

NOTE: Changing channels before clicking "Save" will undo any modified values.

OSD/LOGO SETTINGS:

This tab provides control over the informational OSD (On Screen Display)

formatting as well as user uploaded logo usage and placement.

NOTE: The OSD and Logo cannot be displayed simultaneously. Enabling the Logo function will

automatically disable the OSD.