AEG LAVATHERM 59840 Panduan Pengguna - Halaman 18

Jelajahi secara online atau unduh pdf Panduan Pengguna untuk Pengering AEG LAVATHERM 59840. AEG LAVATHERM 59840 48 halaman. Condenser dryer with heat pump

Halaman Cetak

Daily use

If the programme duration is not selected, the duration is automatically set to 10

mins.

Setting delay timer

With the DELAY button, you can delay the

start of a programme by between 30 mi-

nutes (30') and a maximum of 20 hours

(20h).

1. Select the programme and additional

functions.

2. Press the DELAY button as many times as necessary until the required start

delay appears on the display, e.g. 12h if the programme is to be started in 12

hours.

If the display is showing 20h and you press the button again, the time delay

will be cancelled. The display will show 0'and then the duration of the se-

lected programme.

3. To activate the delay timer, press the START PAUSE button. The amount of time

remaining until the programme is set to start is continuously displayed (e.g.

15h, 14h, 13h, ... 30' etc).

Setting child lock

The child lock can be set to prevent a programme being accidentally started or a

programme in operation being accidentally changed. The child lock function locks

all buttons and the programme knob. The child lock can be activated or deactivated

by holding down the LONG ANTI-CREASE and BUZZER buttons simultaneously for

5 seconds.

– Before programme is started: Appliance cannot be used

– After programme is started: Programme in operation cannot be changed

The ( icon appears in the display to indicate that the child safety device is activated.

The child safety device is not deactivated once the programme comes to an end.

If you want to set a new programme, you must first deactivate the child safety

device.